Mazda MX-30 MOT pass rate and common failures

In 2025, 89.7% of Mazda MX-30 MOT tests were a first-time pass, across 2,236 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

89.7%

All cars: 86.1% (3.6 points better). 2,236 tests.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

–

Too few tests at this age to say.

Pass rate by age

80% 90% 100% 3 4 Age at test (years) Age 3: 90% passed first time (1,654 tests) Age 4: 88.8% passed first time (582 tests) 80% 90% 100% 3 4 Age at test (years) Age 3: 90% passed first time (1,654 tests) Age 4: 88.8% passed first time (582 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
31,65490.0%87.8%21,250 miles
458288.8%86.4%26,250 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Mazda MX-30 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaMX-30All cars
Tyres7.1%8.4%
Visibility3.7%5.2%
Lamps, reflectors and electrical equipment1.7%16.6%
Brakes1.3%10.2%
Suspension0.8%13.7%
Identification of the vehicle0.4%0.4%
Body, chassis, structure0.1%4.2%
Seat belts and supplementary restraint systems0.1%1.1%

Most common reasons for failing

  1. Tread depth below requirements of 1.6mm failed 3.0% of tests
  2. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 2.7% of tests
  3. Wipers: does not clear the windscreen effectively failed 2.1% of tests · what this means
  4. Headlamp aim: too high failed 1.3% of tests · what this means
  5. Washers: provides insufficient washer liquid failed 1.3% of tests · what this means
  6. Shock absorbers: has a serious fluid leak failed 0.7% of tests · what this means
  7. Condition: has a bulge, caused by separation or partial failure of its structure failed 0.4% of tests
  8. Brake discs: significantly and obviously worn failed 0.4% of tests · what this means
  9. Tyre pressure monitoring system: malfunctioning or obviously inoperative failed 0.4% of tests
  10. Brake pads: less than 1.5 mm thick failed 0.4% of tests · what this means

Checking a particular MX-30?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Mazda models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.