Mazda B MOT pass rate and common failures

In 2025, 59.4% of Mazda B MOT tests were a first-time pass, across 1,438 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

–

Too few tests at this age to say.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

59.5%

All cars: 61.3% (1.8 points worse). 1,390 tests.

Pass rate by age

50% 60% 70% 19 20+ Age at test (years) Age 19: 58.4% passed first time (245 tests) Age 20+: 59.7% passed first time (1,145 tests) 50% 60% 70% 19 20+ Age at test (years) Age 19: 58.4% passed first time (245 tests) Age 20+: 59.7% passed first time (1,145 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
1924558.4%57.2%108,750 miles
20+1,14559.7%61.4%118,750 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Mazda B MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaBAll cars
Lamps, reflectors and electrical equipment39.2%16.6%
Body, chassis, structure31.4%4.2%
Suspension21.2%13.7%
Brakes21.1%10.2%
Visibility9.3%5.2%
Tyres6.3%8.4%
Steering5.1%2.5%
Noise, emissions and leaks4.7%4.0%

Most common reasons for failing

  1. Chassis condition: or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting failed 8.1% of tests · what this means
  2. Rear fog lamp: not working failed 7.8% of tests · what this means
  3. Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirt failed 6.6% of tests
  4. Wipers: does not clear the windscreen effectively failed 5.8% of tests · what this means
  5. Rigid brake pipes: excessively corroded failed 5.6% of tests · what this means
  6. Position lamp: not working failed 5.6% of tests · what this means
  7. Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strength failed 4.9% of tests
  8. Tread depth below requirements of 1.6mm failed 3.7% of tests
  9. Chassis condition: corroded to the extent that the rigidity of the assembly is significantly reduced failed 3.4% of tests · what this means
  10. Stop lamp: not working failed 3.0% of tests · what this means

Checking a particular B?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Mazda models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.