Peugeot 306 MOT pass rate and common failures
In 2025, 60.9% of Peugeot 306 MOT tests were a first-time pass, across 3,416 tests in Great Britain. For all cars it was 71.5%.
Compared with cars of the same age
Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.
At 3–5 years
–
Too few tests at this age to say.
At 6–10 years
–
Too few tests at this age to say.
At 11 years and over
60.9%
All cars: 61.3% (0.4 points worse). 3,411 tests.
Figures by age, with typical mileage
| Age (years) | Tests | First-time pass | All cars | Typical mileage |
|---|---|---|---|---|
| 20+ | 3,411 | 60.9% | 61.4% | 103,750 miles |
Typical mileage is the median reading at the test, to the nearest 2,500 miles.
What fails most often
The share of Peugeot 306 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.
| Area | 306 | All cars |
|---|---|---|
| Brakes | 31.0% | 10.2% |
| Lamps, reflectors and electrical equipment | 23.3% | 16.6% |
| Suspension | 20.0% | 13.7% |
| Noise, emissions and leaks | 13.7% | 4.0% |
| Body, chassis, structure | 11.7% | 4.2% |
| Visibility | 9.1% | 5.2% |
| Steering | 7.1% | 2.5% |
| Tyres | 6.1% | 8.4% |
Most common reasons for failing
- Rbt (sp): efficiency below requirements failed 5.8% of tests
- Wipers: does not clear the windscreen effectively failed 4.3% of tests · what this means
- Steering rack: gaiter missing or no longer prevents the ingress of dirt failed 4.0% of tests · what this means
- Exhaust system: has a major leak of exhaust gases failed 3.7% of tests · what this means
- Catalyst emissions: lambda reading after 2nd fast idle outside specified limits failed 3.2% of tests · what this means
- Position lamp: not working failed 3.2% of tests · what this means
- Ball joint excessively worn failed 3.1% of tests · what this means
- Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirt failed 3.1% of tests
- Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strength failed 3.0% of tests
- Service brake imbalance: across an axle failed 2.8% of tests · what this means
Checking a particular 306?
See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.
About these figures
- They cover every 306 version DVSA records under this name (engines, trims and generations together), on its first MOT test of each visit. A “pass with rectification” (fixed within an hour) counts as a fail, as in DVSA’s own statistics.
- Cars under three years old are left out, because the few tested that young are mostly taxis.
- Fuel mix of the cars tested: petrol 60.6%, diesel 39.4%.
- A pass rate describes the model, not any one car. How a car has been looked after matters more.
Download these figures (CSV) · Other Peugeot models · All makes
Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.