MG ZT MOT pass rate and common failures

In 2025, 66.0% of MG ZT MOT tests were a first-time pass, across 1,263 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

–

Too few tests at this age to say.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

65.9%

All cars: 61.3% (4.6 points better). 1,254 tests.

Pass rate by age

50% 60% 70% 80% 18 19 20+ Age at test (years) Age 18: 74% passed first time (50 tests) Age 19: 72.1% passed first time (136 tests) Age 20+: 64.7% passed first time (1,068 tests) 50% 60% 70% 80% 18 19 20+ Age at test (years) Age 18: 74% passed first time (50 tests) Age 19: 72.1% passed first time (136 tests) Age 20+: 64.7% passed first time (1,068 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
185074.0%57.0%71,250 miles
1913672.1%57.2%101,250 miles
20+1,06864.7%61.4%96,250 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of MG ZT MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaZTAll cars
Suspension25.7%13.7%
Brakes23.0%10.2%
Lamps, reflectors and electrical equipment20.6%16.6%
Body, chassis, structure8.6%4.2%
Tyres7.5%8.4%
Noise, emissions and leaks6.0%4.0%
Seat belts and supplementary restraint systems6.0%1.1%
Visibility5.6%5.2%

Most common reasons for failing

  1. Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strength failed 5.6% of tests
  2. Srs malfunction indicator lamp: warning lamp indicates a fault failed 4.8% of tests · what this means
  3. Rbt (sp): efficiency below requirements failed 4.5% of tests
  4. Rigid brake pipes: excessively corroded failed 4.4% of tests · what this means
  5. Headlamp aim: projected beam image is obviously incorrect failed 3.2% of tests · what this means
  6. Ball joint excessively worn failed 2.8% of tests · what this means
  7. Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirt failed 2.6% of tests · what this means
  8. Linkage ball joints: ball joint excessively worn failed 2.5% of tests · what this means
  9. Coil spring: fractured or broken failed 2.4% of tests · what this means
  10. Tread depth below requirements of 1.6mm failed 2.1% of tests

Checking a particular ZT?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other MG models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.