Dodge Caliber MOT pass rate and common failures

In 2025, 48.4% of Dodge Caliber MOT tests were a first-time pass, across 585 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

–

Too few tests at this age to say.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

47.8%

All cars: 61.3% (13.5 points worse). 542 tests.

Pass rate by age

30% 40% 50% 60% 70% 15 16 17 18 Age at test (years) Age 15: 44% passed first time (50 tests) Age 16: 43.8% passed first time (130 tests) Age 17: 52.5% passed first time (204 tests) Age 18: 46.2% passed first time (158 tests) 30% 40% 50% 60% 70% 15 16 17 18 Age at test (years) Age 15: 44% passed first time (50 tests) Age 16: 43.8% passed first time (130 tests) Age 17: 52.5% passed first time (204 tests) Age 18: 46.2% passed first time (158 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
155044.0%58.6%88,750 miles
1613043.8%57.5%88,750 miles
1720452.5%57.2%91,250 miles
1815846.2%57.0%93,750 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Dodge Caliber MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaCaliberAll cars
Suspension51.6%13.7%
Lamps, reflectors and electrical equipment40.7%16.6%
Tyres14.9%8.4%
Brakes14.9%10.2%
Body, chassis, structure14.4%4.2%
Visibility12.3%5.2%
Seat belts and supplementary restraint systems10.6%1.1%
Steering10.4%2.5%

Most common reasons for failing

  1. Position lamp: not working failed 14.9% of tests · what this means
  2. Pins and bushes: pin or bush excessively worn failed 12.8% of tests · what this means
  3. Ball joint excessively worn failed 9.2% of tests · what this means
  4. Tread depth below requirements of 1.6mm failed 8.4% of tests
  5. Prescribed areas: prescribed area strength or continuity significantly reduced failed 7.5% of tests
  6. Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strength failed 7.0% of tests
  7. Track rod end: ball joint has excessive play failed 7.0% of tests · what this means
  8. Stop lamp: not working failed 7.0% of tests · what this means
  9. Integral vehicle structure condition: corroded to the extent that the rigidity of the assembly is significantly reduced failed 6.3% of tests
  10. Shock absorbers: has a serious fluid leak failed 6.0% of tests · what this means

Checking a particular Caliber?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Dodge models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.