Cupra Leon MOT pass rate and common failures

In 2025, 82.7% of Cupra Leon MOT tests were a first-time pass, across 1,086 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

82.7%

All cars: 86.1% (3.4 points worse). 1,081 tests.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

–

Too few tests at this age to say.

Pass rate by age

70% 80% 90% 3 4 Age at test (years) Age 3: 83.9% passed first time (832 tests) Age 4: 78.7% passed first time (249 tests) 70% 80% 90% 3 4 Age at test (years) Age 3: 83.9% passed first time (832 tests) Age 4: 78.7% passed first time (249 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
383283.9%87.8%31,250 miles
424978.7%86.4%38,750 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Cupra Leon MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaLeonAll cars
Tyres16.3%8.4%
Suspension4.1%13.7%
Brakes2.9%10.2%
Lamps, reflectors and electrical equipment2.4%16.6%
Visibility1.9%5.2%
Seat belts and supplementary restraint systems0.9%1.1%
Noise, emissions and leaks0.7%4.0%
Road wheels0.6%0.5%

Most common reasons for failing

  1. Condition: has ply or cords exposed failed 4.4% of tests
  2. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 4.4% of tests
  3. Shock absorbers: has a serious fluid leak failed 2.5% of tests · what this means
  4. Condition: has a bulge, caused by separation or partial failure of its structure failed 2.3% of tests
  5. Tread depth below requirements of 1.6mm failed 1.9% of tests
  6. Condition: has a tear, caused by separation or partial failure of its structure failed 1.5% of tests
  7. Headlamp aim: too high failed 1.1% of tests · what this means
  8. Condition: has a lump, caused by separation or partial failure of its structure failed 0.8% of tests
  9. Brake pads: less than 1.5 mm thick failed 0.7% of tests · what this means
  10. Washers: not working failed 0.7% of tests · what this means

Checking a particular Leon?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Cupra models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.