BMW X2 MOT pass rate and common failures

In 2025, 85.9% of BMW X2 MOT tests were a first-time pass, across 19,278 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

87.4%

All cars: 86.1% (1.3 points better). 12,040 tests.

At 6–10 years

83.4%

All cars: 76.1% (7.3 points better). 7,237 tests.

At 11 years and over

–

Too few tests at this age to say.

Pass rate by age

70% 80% 90% 100% 3 4 5 6 7 Age at test (years) Age 3: 88.4% passed first time (2,773 tests) Age 4: 87.9% passed first time (3,570 tests) Age 5: 86.6% passed first time (5,697 tests) Age 6: 83.5% passed first time (5,787 tests) Age 7: 83% passed first time (1,450 tests) 70% 80% 90% 100% 3 4 5 6 7 Age at test (years) Age 3: 88.4% passed first time (2,773 tests) Age 4: 87.9% passed first time (3,570 tests) Age 5: 86.6% passed first time (5,697 tests) Age 6: 83.5% passed first time (5,787 tests) Age 7: 83% passed first time (1,450 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
32,77388.4%87.8%28,750 miles
43,57087.9%86.4%33,750 miles
55,69786.6%84.5%43,750 miles
65,78783.5%81.9%48,750 miles
71,45083.0%79.3%56,250 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of BMW X2 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaX2All cars
Tyres8.1%8.4%
Lamps, reflectors and electrical equipment3.7%16.6%
Visibility3.4%5.2%
Brakes1.6%10.2%
Noise, emissions and leaks1.4%4.0%
Suspension1.2%13.7%
Road wheels0.4%0.5%
Identification of the vehicle0.3%0.4%

Most common reasons for failing

  1. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 3.1% of tests
  2. Wipers: does not clear the windscreen effectively failed 2.2% of tests · what this means
  3. Condition: has ply or cords exposed failed 1.5% of tests
  4. Tread depth below requirements of 1.6mm failed 1.5% of tests
  5. Headlamp aim: too high failed 1.4% of tests · what this means
  6. Malfunction indicator lamp: inoperative or indicates a malfunction failed 1.3% of tests · what this means
  7. Condition: has a bulge, caused by separation or partial failure of its structure failed 0.9% of tests
  8. Brake pads: less than 1.5 mm thick failed 0.8% of tests · what this means
  9. Washers: provides insufficient washer liquid failed 0.7% of tests · what this means
  10. Individual direction indicators: not working failed 0.7% of tests

Checking a particular X2?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other BMW models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.