Bentley Flying MOT pass rate and common failures

In 2025, 92.3% of Bentley Flying MOT tests were a first-time pass, across 862 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

–

Too few tests at this age to say.

At 6–10 years

91.9%

All cars: 76.1% (15.8 points better). 531 tests.

At 11 years and over

92.2%

All cars: 61.3% (30.9 points better). 154 tests.

Pass rate by age

60% 70% 80% 90% 100% 3 4 5 6 7 8 9 10 11 Age at test (years) Age 3: 95.5% passed first time (88 tests) Age 7: 94.3% passed first time (70 tests) Age 8: 88.5% passed first time (131 tests) Age 9: 92.1% passed first time (139 tests) Age 10: 93.2% passed first time (191 tests) Age 11: 92.2% passed first time (154 tests) 60% 70% 80% 90% 100% 3 5 7 9 11 Age at test (years) Age 3: 95.5% passed first time (88 tests) Age 7: 94.3% passed first time (70 tests) Age 8: 88.5% passed first time (131 tests) Age 9: 92.1% passed first time (139 tests) Age 10: 93.2% passed first time (191 tests) Age 11: 92.2% passed first time (154 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
38895.5%87.8%16,250 miles
77094.3%79.3%26,250 miles
813188.5%76.3%33,750 miles
913992.1%73.1%38,750 miles
1019193.2%70.0%38,750 miles
1115492.2%66.9%41,250 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Bentley Flying MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaFlyingAll cars
Tyres3.4%8.4%
Lamps, reflectors and electrical equipment2.4%16.6%
Brakes2.1%10.2%
Noise, emissions and leaks1.4%4.0%
Suspension1.3%13.7%
Visibility0.6%5.2%
Body, chassis, structure0.5%4.2%
Identification of the vehicle0.5%0.4%

Most common reasons for failing

  1. Condition: has a bulge, caused by separation or partial failure of its structure failed 0.9% of tests
  2. Malfunction indicator lamp: inoperative or indicates a malfunction failed 0.8% of tests · what this means
  3. Pins and bushes: pin or bush excessively worn failed 0.8% of tests · what this means
  4. Condition: has ply or cords exposed failed 0.8% of tests
  5. Stop lamp: not working failed 0.7% of tests · what this means
  6. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 0.6% of tests
  7. Tread depth below requirements of 1.6mm failed 0.5% of tests
  8. Reversing lamps: inoperative failed 0.5% of tests · what this means
  9. Washers: provides insufficient washer liquid failed 0.5% of tests · what this means
  10. Registration plates: does not conform to the specified requirements failed 0.5% of tests · what this means

Checking a particular Flying?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Bentley models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.