Bentley Bentayga MOT pass rate and common failures

In 2025, 95.3% of Bentley Bentayga MOT tests were a first-time pass, across 2,864 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

95.9%

All cars: 86.1% (9.8 points better). 1,234 tests.

At 6–10 years

94.8%

All cars: 76.1% (18.7 points better). 1,630 tests.

At 11 years and over

–

Too few tests at this age to say.

Pass rate by age

60% 70% 80% 90% 100% 3 4 5 6 7 8 9 Age at test (years) Age 3: 97% passed first time (466 tests) Age 4: 94.7% passed first time (418 tests) Age 5: 96% passed first time (350 tests) Age 6: 95.1% passed first time (406 tests) Age 7: 95.4% passed first time (582 tests) Age 8: 94.3% passed first time (487 tests) Age 9: 93.5% passed first time (155 tests) 60% 70% 80% 90% 100% 3 5 7 9 Age at test (years) Age 3: 97% passed first time (466 tests) Age 4: 94.7% passed first time (418 tests) Age 5: 96% passed first time (350 tests) Age 6: 95.1% passed first time (406 tests) Age 7: 95.4% passed first time (582 tests) Age 8: 94.3% passed first time (487 tests) Age 9: 93.5% passed first time (155 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
346697.0%87.8%23,750 miles
441894.7%86.4%28,750 miles
535096.0%84.5%33,750 miles
640695.1%81.9%38,750 miles
758295.4%79.3%46,250 miles
848794.3%76.3%48,750 miles
915593.5%73.1%51,250 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Bentley Bentayga MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaBentaygaAll cars
Tyres2.8%8.4%
Identification of the vehicle1.1%0.4%
Lamps, reflectors and electrical equipment0.8%16.6%
Noise, emissions and leaks0.7%4.0%
Suspension0.7%13.7%
Brakes0.5%10.2%
Visibility0.3%5.2%
Body, chassis, structure0.1%4.2%

Most common reasons for failing

  1. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 1.2% of tests
  2. Registration plates: does not conform to the specified requirements failed 0.8% of tests · what this means
  3. Pins and bushes: pin or bush excessively worn failed 0.6% of tests · what this means
  4. Tread depth below requirements of 1.6mm failed 0.6% of tests
  5. Malfunction indicator lamp: inoperative or indicates a malfunction failed 0.4% of tests · what this means
  6. Condition: has a bulge, caused by separation or partial failure of its structure failed 0.3% of tests
  7. Headlamp aim: too low failed 0.3% of tests · what this means
  8. Condition: has ply or cords exposed failed 0.3% of tests
  9. Brake pads: less than 1.5 mm thick failed 0.2% of tests · what this means
  10. Condition: has a tear, caused by separation or partial failure of its structure failed 0.2% of tests

Checking a particular Bentayga?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Bentley models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.