Audi SQ7 MOT pass rate and common failures

In 2025, 89.1% of Audi SQ7 MOT tests were a first-time pass, across 1,217 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

89.1%

All cars: 86.1% (3 points better). 1,189 tests.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

–

Too few tests at this age to say.

Pass rate by age

70% 80% 90% 100% 3 4 5 Age at test (years) Age 3: 88.4% passed first time (371 tests) Age 4: 89.2% passed first time (443 tests) Age 5: 89.6% passed first time (375 tests) 70% 80% 90% 100% 3 4 5 Age at test (years) Age 3: 88.4% passed first time (371 tests) Age 4: 89.2% passed first time (443 tests) Age 5: 89.6% passed first time (375 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
337188.4%87.8%33,750 miles
444389.2%86.4%43,750 miles
537589.6%84.5%53,750 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Audi SQ7 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaSQ7All cars
Tyres10.6%8.4%
Identification of the vehicle1.6%0.4%
Noise, emissions and leaks1.2%4.0%
Lamps, reflectors and electrical equipment1.2%16.6%
Brakes1.1%10.2%
Visibility0.7%5.2%
Suspension0.4%13.7%
Seat belts and supplementary restraint systems0.3%1.1%

Most common reasons for failing

  1. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 4.2% of tests
  2. Condition: has ply or cords exposed failed 2.8% of tests
  3. Tread depth below requirements of 1.6mm failed 1.9% of tests
  4. Registration plates: does not conform to the specified requirements failed 1.6% of tests · what this means
  5. Malfunction indicator lamp: inoperative or indicates a malfunction failed 1.0% of tests · what this means
  6. Condition: has a bulge, caused by separation or partial failure of its structure failed 0.9% of tests
  7. Headlamp aim: too high failed 0.7% of tests · what this means
  8. Brake pads: less than 1.5 mm thick failed 0.6% of tests · what this means
  9. Condition: has a tear, caused by separation or partial failure of its structure failed 0.5% of tests
  10. Washers: provides insufficient washer liquid failed 0.4% of tests · what this means

Checking a particular SQ7?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Audi models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.