Audi SQ5 MOT pass rate and common failures

In 2025, 90.3% of Audi SQ5 MOT tests were a first-time pass, across 1,765 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

93.2%

All cars: 86.1% (7.1 points better). 1,197 tests.

At 6–10 years

88.9%

All cars: 76.1% (12.8 points better). 235 tests.

At 11 years and over

80.2%

All cars: 61.3% (18.9 points better). 248 tests.

Pass rate by age

60% 70% 80% 90% 100% 3 4 5 6 7 8 9 10 11 Age at test (years) Age 3: 93.8% passed first time (530 tests) Age 4: 93.6% passed first time (435 tests) Age 5: 90.9% passed first time (232 tests) Age 10: 88.9% passed first time (235 tests) Age 11: 80.2% passed first time (248 tests) 60% 70% 80% 90% 100% 3 5 7 9 11 Age at test (years) Age 3: 93.8% passed first time (530 tests) Age 4: 93.6% passed first time (435 tests) Age 5: 90.9% passed first time (232 tests) Age 10: 88.9% passed first time (235 tests) Age 11: 80.2% passed first time (248 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
353093.8%87.8%36,250 miles
443593.6%86.4%41,250 miles
523290.9%84.5%46,250 miles
1023588.9%70.0%91,250 miles
1124880.2%66.9%98,750 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Audi SQ5 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaSQ5All cars
Tyres5.1%8.4%
Suspension3.6%13.7%
Brakes2.3%10.2%
Lamps, reflectors and electrical equipment1.9%16.6%
Visibility1.0%5.2%
Identification of the vehicle0.8%0.4%
Noise, emissions and leaks0.6%4.0%
Body, chassis, structure0.3%4.2%

Most common reasons for failing

  1. Tread depth below requirements of 1.6mm failed 1.9% of tests
  2. Pins and bushes: pin or bush excessively worn failed 1.5% of tests · what this means
  3. Brake pads: less than 1.5 mm thick failed 1.2% of tests · what this means
  4. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 1.2% of tests
  5. Coil spring: fractured or broken failed 0.9% of tests · what this means
  6. Condition: has ply or cords exposed failed 0.7% of tests
  7. Registration plates: does not conform to the specified requirements failed 0.7% of tests · what this means
  8. Condition: has a bulge, caused by separation or partial failure of its structure failed 0.6% of tests
  9. Malfunction indicator lamp: inoperative or indicates a malfunction failed 0.5% of tests · what this means
  10. Wipers: does not clear the windscreen effectively failed 0.5% of tests · what this means

Checking a particular SQ5?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Audi models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.