Audi S3 MOT pass rate and common failures
In 2025, 84.1% of Audi S3 MOT tests were a first-time pass, across 6,026 tests in Great Britain. For all cars it was 71.5%.
Compared with cars of the same age
Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.
At 3–5 years
90.3%
All cars: 86.1% (4.2 points better). 2,614 tests.
At 6–10 years
86.5%
All cars: 76.1% (10.4 points better). 742 tests.
At 11 years and over
77.2%
All cars: 61.3% (15.9 points better). 2,635 tests.
Pass rate by age
Figures by age, with typical mileage
| Age (years) | Tests | First-time pass | All cars | Typical mileage |
|---|---|---|---|---|
| 3 | 1,318 | 90.7% | 87.8% | 26,250 miles |
| 4 | 1,196 | 89.4% | 86.4% | 33,750 miles |
| 5 | 100 | 95.0% | 84.5% | 36,250 miles |
| 7 | 62 | 91.9% | 79.3% | 58,750 miles |
| 8 | 77 | 88.3% | 76.3% | 63,750 miles |
| 9 | 131 | 85.5% | 73.1% | 63,750 miles |
| 10 | 472 | 85.8% | 70.0% | 76,250 miles |
| 11 | 509 | 85.7% | 66.9% | 81,250 miles |
| 12 | 120 | 77.5% | 64.4% | 88,750 miles |
| 13 | 244 | 73.8% | 62.1% | 91,250 miles |
| 14 | 349 | 76.8% | 60.2% | 98,750 miles |
| 15 | 323 | 75.2% | 58.6% | 101,250 miles |
| 16 | 229 | 76.0% | 57.5% | 113,750 miles |
| 17 | 274 | 77.0% | 57.2% | 126,250 miles |
| 18 | 160 | 73.1% | 57.0% | 126,250 miles |
| 20+ | 427 | 72.8% | 61.4% | 131,250 miles |
Typical mileage is the median reading at the test, to the nearest 2,500 miles.
What fails most often
The share of Audi S3 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.
| Area | S3 | All cars |
|---|---|---|
| Tyres | 7.5% | 8.4% |
| Lamps, reflectors and electrical equipment | 5.9% | 16.6% |
| Suspension | 5.7% | 13.7% |
| Noise, emissions and leaks | 4.4% | 4.0% |
| Brakes | 4.3% | 10.2% |
| Body, chassis, structure | 2.3% | 4.2% |
| Visibility | 1.8% | 5.2% |
| Steering | 0.7% | 2.5% |
Most common reasons for failing
- Tread depth below requirements of 1.6mm failed 2.2% of tests
- Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 1.8% of tests
- Condition: has ply or cords exposed failed 1.6% of tests
- Coil spring: fractured or broken failed 1.6% of tests · what this means
- Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirt failed 1.5% of tests · what this means
- Malfunction indicator lamp: inoperative or indicates a malfunction failed 1.1% of tests · what this means
- Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirt failed 1.1% of tests
- Headlamp aim: too low failed 0.9% of tests · what this means
- Brake pads: less than 1.5 mm thick failed 0.9% of tests · what this means
- Catalyst emissions: lambda reading after 2nd fast idle outside specified limits failed 0.9% of tests · what this means
Checking a particular S3?
See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.
About these figures
- They cover every S3 version DVSA records under this name (engines, trims and generations together), on its first MOT test of each visit. A “pass with rectification” (fixed within an hour) counts as a fail, as in DVSA’s own statistics.
- Cars under three years old are left out, because the few tested that young are mostly taxis.
- Fuel mix of the cars tested: petrol 100.0%, diesel 0.0%.
- A pass rate describes the model, not any one car. How a car has been looked after matters more.
Download these figures (CSV) · Other Audi models · All makes
Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.