Audi RS6 MOT pass rate and common failures

In 2025, 89.5% of Audi RS6 MOT tests were a first-time pass, across 1,933 tests in Great Britain. For all cars it was 71.5%.

Compared with cars of the same age

Older cars fail more often, so a model that’s mostly a few years old will look better than one that’s mostly 12. These figures compare like with like.

At 3–5 years

91.6%

All cars: 86.1% (5.5 points better). 1,266 tests.

At 6–10 years

–

Too few tests at this age to say.

At 11 years and over

84.7%

All cars: 61.3% (23.4 points better). 483 tests.

Pass rate by age

50% 60% 70% 80% 90% 100% 3 6 9 12 15 18 Age at test (years) Age 3: 90% passed first time (409 tests) Age 4: 92.9% passed first time (580 tests) Age 5: 91.3% passed first time (277 tests) Age 10: 84.4% passed first time (77 tests) Age 11: 87.5% passed first time (88 tests) Age 16: 84.9% passed first time (166 tests) Age 17: 87.5% passed first time (80 tests) Age 20+: 81.2% passed first time (149 tests) 50% 60% 70% 80% 90% 100% 3 8 13 18 Age at test (years) Age 3: 90% passed first time (409 tests) Age 4: 92.9% passed first time (580 tests) Age 5: 91.3% passed first time (277 tests) Age 10: 84.4% passed first time (77 tests) Age 11: 87.5% passed first time (88 tests) Age 16: 84.9% passed first time (166 tests) Age 17: 87.5% passed first time (80 tests) Age 20+: 81.2% passed first time (149 tests)
This model All cars
Figures by age, with typical mileage
Age (years)TestsFirst-time passAll carsTypical mileage
340990.0%87.8%26,250 miles
458092.9%86.4%31,250 miles
527791.3%84.5%36,250 miles
107784.4%70.0%71,250 miles
118887.5%66.9%76,250 miles
1616684.9%57.5%96,250 miles
178087.5%57.2%101,250 miles
20+14981.2%61.4%113,750 miles

Typical mileage is the median reading at the test, to the nearest 2,500 miles.

What fails most often

The share of Audi RS6 MOT tests that failed on at least one item in each area, against all cars. A test can fail on several areas at once.

AreaRS6All cars
Tyres7.1%8.4%
Lamps, reflectors and electrical equipment2.6%16.6%
Noise, emissions and leaks2.6%4.0%
Brakes2.1%10.2%
Suspension1.9%13.7%
Identification of the vehicle1.3%0.4%
Visibility0.9%5.2%
Body, chassis, structure0.5%4.2%

Most common reasons for failing

  1. Condition: has a cut in excess of the requirements deep enough to reach the ply or cords failed 2.4% of tests
  2. Condition: has ply or cords exposed failed 1.8% of tests
  3. Condition: has a bulge, caused by separation or partial failure of its structure failed 1.2% of tests
  4. Registration plates: does not conform to the specified requirements failed 1.2% of tests · what this means
  5. Headlamp aim: too high failed 0.7% of tests · what this means
  6. Pins and bushes: pin or bush excessively worn failed 0.7% of tests · what this means
  7. Tread depth below requirements of 1.6mm failed 0.6% of tests
  8. Headlamp aim: too low failed 0.6% of tests · what this means
  9. Brake pads: less than 1.5 mm thick failed 0.6% of tests · what this means
  10. Catalyst emissions: lambda reading after 2nd fast idle outside specified limits failed 0.6% of tests · what this means

Checking a particular RS6?

See its own MOT history, mileage record and advisories in plain English. Free, no sign-up.

About these figures

Download these figures (CSV) · Other Audi models · All makes

Source: DVSA anonymised MOT test data for 2025. Contains public sector information licensed under the Open Government Licence v3.0. Our own analysis; not produced or endorsed by DVSA.